Категории

Информационен email

U1232A Покажи в цял размер

U1232A

ЦИФРОВ МУЛТИЦЕТ TRUE RMS

Повече детайли

Наличност: Продукта вече не е наличен

Само онлайн

Цена :

264,96 лв

Добави в количка

14 подобни продукта

Electrical Specifications
DC specifications
Accuracy ± Burden
(% of reading + counts Test voltage/ Input
of least significant digit) current shunt impedance
U1231A/U1232A/ Where Where Where
Function Range Resolution U1233A (applicable) (applicable) (applicable)
Voltage
600 mV1 0.1 mV 0.5% + 2 NA NA 11.18 MΩ
6V 0.001 V 0.5% + 2 NA NA 11.18 MΩ
60 V 0.01 V 0.5% + 2 NA NA 10.1 MΩ
600 V 0.1 V 0.5% + 2 NA NA 10 MΩ
0.1 V 2% + 3 NA NA 3 kΩ
600 V
(VZLOW)2
Resistance
600 Ω4 0.1 Ω 0.9% + 3 0.57 mA NA NA
6 kΩ4 0.001 kΩ 0.9% + 3 57 μA NA NA
60 kΩ 0.01 kΩ 0.9% + 3 5.7 μA NA NA
600 kΩ 0.1 kΩ 0.9% + 3 570 nA NA NA
6 MΩ5 0.001 MΩ 0.9% + 3 100 nA/10 MΩ NA NA
60 MΩ5 0.01 MΩ 1.5% + 3 100 nA/10 MΩ NA NA
Diode3
2V 0.001 V 0.9% + 2 0.57 mA NA NA
Current4
60 μA1 0.01 μA 1.0% + 2 NA < 2.5 V/1 kΩ NA
600 μA1 0.1 μA 1.0% + 2 NA < 2.5 V/1 kΩ NA
6 A2,5 0.001 A 1.0% + 3 NA < 0.2 V/0.005 Ω NA
10 A2, 3 0.01 A 1.0% + 3 NA < 0.4 V/0.005 Ω NA
Notes for DC voltage specifications:
1. The accuracy of the 600 mV range is specified after the Null function is used to subtract the thermal effect (by shorting the test leads).
2. For VZLOW (low input impedance) measurements, auto-ranging is disabled and the multimeter’s range is set to 600 V in the manual ranging mode.
Notes for resistance specifications:
1. Overload protection: 600 Vrms for short circuits with < 0.3 A current.
2. Maximum open voltage is < +3 V.
3. Built-in buzzer beeps when the resistance measured is less than 23 Ω ± 10 Ω. The multimeter can capture intermittent measurements longer than 1 ms.
4. The accuracy of the 600 Ω to 6 kΩ range is specified after the Null function is used to subtract the test lead resistance and thermal effect (by shorting
the test leads).
5. For the ranges of 6 MΩ and 60 MΩ, the RH is specified for < 60%.
Notes for diode specifications:
1. Overload protection: 600 Vrms for short circuits with < 0.3 A current.
2. Built-in buzzer beeps continuously when the voltage measured is less than 50 mV and beeps once for forward-biased diode or semiconductor
junctions measured between 0.3 V and 0.8 V (0.3 V ≤ reading ≤ 0.8 V).
3. Open voltage for diode: < +3 V DC.
4. The maximum display for diode measurements is 2100 counts.
Notes for DC current specifications:
1. Overload protection for 60 μA to 600 μA range: 600 Vrms for short circuits with < 0.3 A current.
2. Overload protection for 6 A to 10 A range: 11 A/1000 V; 10 × 38 mm fast-acting fuse.
3. Specification for 10 A range: 10 A continuous. Add 0.3% to the specified accuracy when measuring signals > 10 A to 20 A for 30 seconds maximum. After
measuring currents > 10 A, cool down the multimeter for twice the duration of the measured time before proceeding with low current measurements.
4. Only applicable for the U1232A/U1233A model
5. DC current range of 0.6 μA to 1 μA is not measureable on the U1232A and U1233A models.
3

Write your review

U1232A

U1232A

ЦИФРОВ МУЛТИЦЕТ TRUE RMS

Write your review

Контакти

РАБОТНО ВРЕМЕ на магазина офиса и склада : ПОНЕДЕЛНИК, ВТОРНИК и СРЯДА от 09:00 до 18:00 Tелефон:

Телефон:+359 888 50 50 45

Свържете се с нас